What should I do with vape?

When we smoke vape, we often encounter problems that are not satisfactory, such as liquid leakage, paste smell, hot mouth or being caught. These are very bad experiences. There is no good solution to the leakage problem. Paste needs to be checked by the personal experience of the Absorption cotton, try to avoid dry burning; most of the nicotine and cold agent are caused by the high temperature, please choose the E-liquid suitable for your own dosage; and the solution of the hot mouth There are many.

Small smoke generally does not have the problem of hot mouth, because its power is too small, no matter how you use it, the smoke coming out will only be a little feverish. But the high-power vape is different. The high-power vape is powered by 100W. If it is used improperly, it will be easily burned to the mouth.

Venting problem:

High-power E-liquid uses a large smoke Atomizer and a mouth-absorbent Atomizer. Usually, large smoke will be driven by high power, and the heat generated will be higher. But the big smoke Atomizer has the advantage that the vent can be adjusted. Under the influence of a large amount of airflow, even if you use more than 200W, it is difficult to have a hot mouth phenomenon.

The high-power vape is usually caused by the adjustment of the vent hole. The other one is that you are inhaling too slowly, and you may also be blown out of the E-liquid.

A good function of the high-power vape is to adjust the power. Different powers should deal with different E-liquids and different enjoyments. Some E-liquids require high-powered drives, and fancy smoke requires more power to generate more. More smoke, different power gives people a different experience. In most cases, more powerful smoke will bring more taste enjoyment.

However, if the power is turned up, it will generate more heat in the same time. If you increase the power, the power and the air intake of the vent hole will not match, and the heat dissipation condition will not be reached. It is easy to burn to the mouth, so in the case of high power, it must be noted that the ventilator is open enough.

Inspiratory speed:

Many vape new users are the most likely mistakes, because they are afraid of being smog, and the result is slower when inhaling, and even there will be pauses, which is the most prone to hot mouth phenomenon.

For vape novices, I recommend using no nicotine E-liquid and ice-free E-liquid, and the power is not higher than 50W. The smoke generated is basically not irritating, and the taste and amount of smoke are also acceptable.

When you are familiar with nicotine-free, ice-free E-liquid, you can try nicotine E-liquid again. If you didn't have the habit of smoking cigarettes, try not to use nicotine E-liquid. The content of nicotine E-liquid can be selected from 3MG. Before adapting to 3MG, please try not to use the highest concentration of E-liquid. Because the method of smoking is different from cigarettes, the throat feeling is not acceptable to many people.

Other solutions:

The height of the coil is also a factor affecting the heat dissipation. When assembling the heating coil, try to increase the height of the coil a little. In this case, the airflow coming in from the vent hole easily flows through the real heating ring, which has a better heat dissipation effect. At the same time, smoke is also easier to come out.

It is also a good way to use the extended version of the mouthpiece, and there will be no trouble with the fried oil. It is recommended that the novice can start with one.